Sony Xperia E1 D2105 Pattern Lock Remove Hard Reset
Solution Guide
Problem & Solution
Sony Xperia E1 D2105 Pattern Lock Remove Hard Reset Solution
Sony E1 D2105Remove Pattern Lock, Hard Reset Solution
How To Hard Reset Sony D2105 , Pattern Lock, User Code Reset, Hard Reset Code, Pattern Lock Remove.
Sony E1 D2105Remove Pattern Lock, Hard Reset Solution
How To Hard Reset Sony D2105 , Pattern Lock, User Code Reset, Hard Reset Code, Pattern Lock Remove.
Download Flashtool version 0.9.18.5 (or the latest available) from here.
After downloading above Flashtool, install it.
On opening it, it may ask you to move files stored in F:\Flashtool\firmwares toF:\Users\PC NAME\.flashTool\firmware (Do move the ftf stored if asked to do so).
Wait then till it syncs the devices list (if it don’t syncs because you are not connected to internet, then leave it. It is not mandatory to do sync).
Step 2 – Download Firmware Ftf file
Download Xperia E1 Dual D2105_20.1.B.0.64 Pattern Lock Remove File
Step 3 – Put your above download firmware ftf in “F:\Users\PC NAME\.flashTool\firmware” folder
Additional Step :- Install Drivers
Install Drivers from the folder named “Flashtool Drivers” in the location where Flashtool is installed OR just install PC Companion on your PC and connect your device with it and then remove it.
Step 4 – Open FlashTool
Now Open Flashtool. See the “Black Lightning Thunder icon” at the top left corner. Click on it.
Step 6 – You will now automatically see your download firmware ftf file in the “firmware” section (left hand side) of Flashtool window. Select your firmware.
After clicking on “Flash” Button in above step, now FlashTool will prepare firmware ftf selected for flashing.
Step 9 – Connecting phone in FlashMode.
How to do ? Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.
Do it: Click on “Flash” button
Step 7 – Preparing files for flashingAfter clicking on “Flash” Button in above step, now FlashTool will prepare firmware ftf selected for flashing.
Step 9 – Connecting phone in FlashMode.
How to do ? Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.
Here is flash tool
Here is Drivers
0 Comments